General Receiver Functions - Komatsu 730E Operation & Maintenance Manual

OM7004 4/05

GENERAL RECEIVER FUNCTIONS

Turning The Power On And Off
1. Turn the key switch to ON.
2. Press PWR (1, Figure 70-1) to turn the receiver
on and off. Pushing ON/AUDIO (6) also turns
the receiver power on.
Display
With the receiver off, the clock will be displayed.
Momentarily pressing DSP/TM SET (9) with the
receiver on will allow the operator to toggle between
displays.
• When the receiver is in AM, FM1, FM2, or WX,
the display will toggle between the frequency and
the clock.
• When the receiver is in an active satellite mode
and the provider is transmitting the available
information, the display will toggle between the
clock, frequency, station name, artist, song title
and music type.
• When the receiver is in the cassette mode, the
display will toggle between TP SIDE 1 or TP
SIDE 2, and the clock.
RADIO / CASSETTE PLAYER
FIGURE 70-1. RADIO / CASSETTE PLAYER
Radio / Cassette Player - Section 70
Setting The Default Display
1. Press and hold DSPL/TM (9) for two seconds
until the hour digits flash.
2. Press push-button 6/FF (15) to change the
default display.
After five seconds of inactivity has elapsed, the
selected default will display.
Adjusting Display Brightness
1. Press and hold DIM (14) until DIM appears on
the display.
2. Rotate ON/AUDIO knob (6) clockwise or coun-
terclockwise until the desired brightness is
obtained.
Page 70-1