•
Electric shock can cause serious or fatal injury. Only qualified electrical mainte-
nance personnel should perform electrical testing
•
This system is capable of causing physical harm. Use caution during test proce-
dures to protect personnel from injury.
•
All potential testing should be considered hazardous. Proper precautions are nec-
essary.
•
Any time one of the plug-in circuit cards must be removed or reinstalled, be cer-
tain the control power switch is "OFF". When removing a G.E. Propulsion system
circuit board, a grounding strap should be worn to dissipate static electrical
charges.
•
Extreme care should be exercised to prevent damage to the various semi-conduc-
tor devices and low impedance circuits under test. When using an ohmmeter to
check diodes, transistors and low power conductors, care must be used when
using the X1 scale. Excessive current can damage meter.
•
Check wiring and cables for proper routing, clamping and termination.
D1-2
Index
D01035