General Information - Komatsu 830E Shop Manual

Hide thumbs Also See for 830E:

Table of Contents

STATEX III ELECTRICAL SYSTEM CHECKOUT PROCEDURE

G E N E R A L

I N F O R M A T I O N

This checkout procedure describes test and adjustment procedures for the G.E. STATEX III Electric

Wheel Drive Systems used on Model 445E, 510E, 630E, 685E, 730E, and 830E electric drive trucks

with the following alternator and wheelmotor combinations.

630E, 685E, 730E

630E, 685E, 830E

Sample PTU screens illustrated in the following pages show menus and data screens as they appear

in the April, 2001 STATEX III Enhanced Version 1.00 software release. Instructions are also applica-

ble to the April 2000, version 14.00 software release. Later versions of the software may differ.

The following type fonts and styles are used to differentiate between menu titles, screen titles, menu

selections and keyboard keys to be pressed:

"Quotation Marks"

This system is capable of developing high voltage. Use caution when

working with the system.

The test and adjustment procedures list standard and

optional equipment which may be installed. It is the responsi-

bility of the personnel using this Electrical Checkout Proce-

dure to determine what equipment is installed on the truck

being serviced and to select the applicable test and adjust-

ment procedure.

If any of the cards in the FL275 panel must be removed, a

wrist ground strap MUST be worn to ground personnel to the

truck chassis to prevent static discharge damage to the cir-

cuit boards. After the board has been removed from the

panel, it must immediately be placed in a static-free protec-

Menu & Screen Titles

Menu Selection Choices

Key to be pressed

Statex III Electrical Checkout Procedure

GE772, GE776, GE791

GE776, GE788

GE788, GE787

GE OHV STATEX III MENU

"PTU TALK TO TRUCK"

[ENTER], [ESC], [DEL] etc.

Chapters

Table of Contents