Komatsu 830E Shop Manual page 554

PART NO. DESCRIPTION
Engine Turning
ED8860* Tool
(MTU Engine Only)
NOTE:
To use this tool for the MTU/DDC 4000 Series Engine, it
must be used with the locally made Adapter Plate.
* This tool may also be acquired as MTU Part Number
F6 555 766.
PART NO. DESCRIPTION
ED8860 Engine Turn-over
w/Adapter Tool for MTU/DDC
Plate 4000 Series Engine
NOTE: To use the MTU engine turn-over tool for the
MTU/DDC 4000 Series Engine, it must be used with the
locally made Adapter Plate as shown here.
Remove screen/cover plate on the bottom of the engine
flywheel housing at the 5 or 7 o'clock position.
Install assembly and use 1/2" drive wrench in driver
socket (4) to turn engine.
1. Adapter Plate
2. Sockethead Capscrew
PART NO. DESCRIPTION
Make
Adapter Plate
Locally
M8-4
USE
To Rotate
Engine Crankshaft
USE
To Rotate
Engine Crankshaft
USE
Use with ED8860
Engine Turning Tool
as shown above.
Special Tools
3. ED8860 Turn-over Tool
4. Driver Socket
M08005 7/02