General Information; Control Symbols - Komatsu 730E Operation & Maintenance Manual

Operation - Section 32
Page 32-12

GENERAL INFORMATION

The operator must understand the function and oper-
ation of each instrument and control (Figure 32-10).
Control functions are identified with international
symbols that the operator must learn to recognize
immediately. This knowledge is essential for proper
and safe operation.
Items that are marked as optional do not apply to
every truck.

CONTROL SYMBOLS

The following symbols are general indicators and
may appear in multiple locations and combinations
on the instrument panel.
This symbol may be used alone
or with another symbol. This
symbol identifies the OFF posi-
tion of a switch or control.
This symbol may be used alone
or with another symbol. This sym-
bol identifies the ON position of a
switch or control.
This symbol identifies the pushed
in position of a push-pull switch or
control.
This symbol identifies the pulled
out position of a push-pull switch
or control.
OM3241
Operator Cab and Controls
This symbol, when it appears on
an indicator or control, identifies
that this indicator or control is not
used.
This symbol identifies a rotary
control or switch. Rotate the knob
clockwise or counterclockwise for
functions.
This symbol identifies a switch
used to test or check a function.
Press the switch on the side near
the symbol to perform the test.