Expanding The Cutting Area - GRAPHTEC CELITE-50 User Manual

4.7

Expanding the Cutting Area

The cutting area can be expanded by setting the margin for the media width.
When "EXPAND" is selected, the cutting area is expanded on the left and right sides compared to when
"NORMAL" is selected.
•
Although cutting at positions that overlap with the push rollers is possible when"EXPAND" is selected, the
push roller will be moving within the cutting area and this may prevent normal transport with certain types of
media.
•
Send cutting data after setting the margin. The cutting data in the buffer memory will be erased when the
margin is changed.
Once you are done with the setting, touch the
Sheet Media
When margin is normal
10mm
Roll Media
When margin is normal
15mm
1.
From the "MENU" screen, open the "AREA 1/2" screen.
2.
For the margin, select "EXPAND".
(Exit) to return to the "HOME" screen.
Push Roller Position
Cutting Area
Push Roller Position
Cutting Area
15mm
Chapter 4 Convenient Functions
When margin is narrowed
Push Roller Position
Cutting Area
5mm
When margin is narrowed
Push Roller Position
Cutting Area
5mm 5mm
4-23