Setting the Auto Pre Feed
Set the operation for preventing displacement of the media by first transporting the media by a set amount and
placing traces of the rollers on the media.
When feeding long media, breaking in the media to the environment removes expanded or contracted areas
and enables the media to be fed in a stable manner.
Setting values: 10 - 300 (cm)
1.
From the "MENU" screen, open the "MEDIA 1/3" screen.
2.
Select "ON" or "OFF" for "AUTO PRE FEED".
When "ON" is selected, it will be possible to input a value in the
"FEED LENGTH".
3.
Touch the "FEED LENGTH".
4.
Input the distance by which to feed the media and confirm the
input with the
(Confirm).
Setting the Initial Feed
A setting can be made to automatically feed and then return the media by the length of a page when the
media is loaded. This setting has the effect of automatically performing the "pre feed operation" for preventing
displacement of the media.
For details on the setting for the "PAGE LENGTH", refer to "Setting the Page Length" under "4.1 Cutting Roll
Media".
1.
From the "MENU" screen, select "MEDIA
1/3" and proceed to the "MEDIA 2/3"
screen
2.
Select "ON" or "OFF" for "INITIAL FEED".
Chapter 5 Detailed Settings
5-21