Quick Dial Button Settings - 2N IP intercom Configuration Manual

Quick Dial Button Settings

All the 2N IP intercom models are equipped with quick dial buttons. If you press a
quick dial button, a call will be set up to the phone number assigned to the respective
Users list position.
Select position 1, which corresponds to quick dial button 1, in the Directory / Users
menu.
Enable the position in the Position Enabled field and enter the called station phone
number into the Phone Number parameter in the User Phone Numbers section.
You can also use the 2N IP intercom with one or more IP phones without a SIP server.
Use the Direct SIP Call for outgoing calls and enter the called phone SIP address (sip:
phone_number@phone_ip_address) instead of the phone number.
2N TELEKOMUNIKACE a.s., www.2n.cz 12/198