Device Connection; Device Configuration; Api Access; Figure 1: Http Api Settings - 2N Helios IP Documentation

Device Connection

The Helios IP device is connected to the Local Area Network. The intercom is supplied via PoE or an
external power supply.

Device Configuration

API Access

Make basic configuration after connecting the device to the LAN.Default access values are (Login:
admin, Password: 2n). The C4 - Helios IP communication runs via the intercom HTTP API. Set the API
login data and enable the API functions to access this function. Go to the Services menu and select the
HTTP API submenu via the Helios IP web interface. Enable the functions, select the TLS or TCP
connection type and set the authentication type to None or Basic as shown in the figure below.

Figure 1: HTTP API Settings

Helios IP – Documentation Page 5