IN1
IN2
TAMPER
5-Button
The 5-button module (Part No. 9155035) is one of the 2N
used for extending the number of buttons.
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 220 mm long interconnecting cable.
•
Nametag dimensions:
•
1 button: 52,0 (W) x 15.2 (H) mm (dimensional tolerance: +0; −0.5 mm).
•
5 buttons: 57.5 (W) x 89.0 (H) mm (dimensional tolerance: +0; −0.5 mm).
•
Refer to www.2n.com for the nametag printing template.
IN1 terminals for input in passive/ active mode (−30 V to +30 V
DC)
OFF = open OR U
IN
ON = closed contact OR U
IN2 terminals for input in passive/active mode (−30 V to +30 V DC)
OFF = open OR U
IN
ON = closed contact OR U
Tamper switch (9155038) input
®
IP Verso bus connectors.
Installation manual 2N® IP Verso
> 1.5 V
< 1.5 V
IN
> 1.5 V
< 1.5 V
IN
®
IP Verso intercom elements and is
198 / 241