2N IP intercom Configuration Manual page 91

Intensity by day
ntensity by night
the Intensity by day and
the ambient light level is ignored.
Current brightness
selected according to the ambient daylight level.
Poznámka
The brightness parameters affect the function, power consumption and
general appearance of your device. A high nametag and button
backlight value may, if the ambient light level is low, dazzle the persons
standing in front of the intercom and, in general, increase the power
consumption of the device. A low LED intensity value, on the other hand,
may, if the intercom is placed in direct sun, result in a lower LED on/off
contrast and potential LED state identification problems.
2N TELEKOMUNIKACE a.s., www.2n.cz
– set the LED intensity percentage value for the day mode.
– set the LED intensity percentage value for the night mode
Intensity by
– display the current LED intensity value automatically
night are set to one and the same value,
. If
91/198