Electric Lock Switching Settings - 2N IP intercom Configuration Manual

Electric Lock Switching Settings

An electric lock can be attached to the 2N IP intercoms and controlled by a code from
the intercom numeric keypad, or a code from the IP phone keypad during a call.
Connect the electric lock as instructed in the Installation Manual of your intercom
model.
Enable the switch in the Switch Enabled parameter in the Hardware / Switches /
Switch 1 tab, set the Controlled Output to the intercom output to which the electric
door lock is connected. Now set one or more activation codes for the electric door
lock switching.
2N TELEKOMUNIKACE a.s., www.2n.cz 13/198