2N IP intercom Configuration Manual page 37

Event
CardEntered
CardHeld
CallStateChanged
AudioLoopTest
CodeEntered
SilentAlarm
AccessLimited
DeviceState
MotionDetected
RegistrationStateChanged
SwitchStateChanged
NoiseDetected
TamperSwitchActivated
UnauthorizedDoorOpen
DoorOpenTooLong
2N TELEKOMUNIKACE a.s., www.2n.cz
Description
Indicates that an RFID card has been tapped.
Indicates that an RFID card has been held for more than 4s.
Indicates a call state change (ringing, connected, terminated)
including call direction (incoming, outgoing) and number.
Generated after the audio test indicating the test result.
Generated whenever a code ending with * is entered via the
numeric keyboard.
Silent alarm event generated whenever a code higher by one than
the correct one is entered. With access code 123, the silent alarm
code is 124.
Event generated whenever 5 wrong access codes are entered via
the numeric keypad, settings are in Hardware / Keypad / Numeric
Keypad.
Device state indication, startup of the device, for example.
Generated after motion detection, settings can be made in
Hardware / Camera / Internal Camera.
Change of the SIP Proxy registration state.
Change of the switch state, settings in Hardware / Switches.
Generated after noise detection, settings in Hardware / Audio.
Tamper Switch state indication.
Unauthorised door opening indication, settings in Hardware /
Digital Inputs / Door State.
Detection of a too-long opened door, settings in Hardware /
Digital Inputs / Door State.
37/198