2N IP intercom Configuration Manual page 175

List of Parameters
Synchronise – push the button to synchronise the intercom time value with your PC
time value.
Time zone – set the time zone for the installation site to define time shifts and
winter/summer time transitions.
Time zone rule – if the intercom is installed on a site that it not included in the
Time zone parameter, set the time zone rule manually. The rule is applied only if
the Time zone
Use NTP server – enable the NTP server use for intercom time synchronisation.
NTP server address – set the IP address/domain name of the NTP server used
for your intercom time synchronisation.
NTP time status – display the state of the last local time synchronisation attempt
via the NTP server
2N TELEKOMUNIKACE a.s., www.2n.cz
parameter is set to
(Not Synchronised, Synchronised, Error).
Manual .
175/198