Telephone Mode Enabled; Maximum Number Of Dialled Digits; Keypad Mapping - 2N IP intercom Configuration Manual

display sides to make the intercom dial the phonebook position defined by the
selected floor number and button. The phonebook position is calculated as 6 x
floor number + N, where N is 1 for A, 2 for B, 3 for C, and so on. This mode is
available for 2N

Telephone mode enabled

intercom numeric keypad. Set up a call as follows: press
phone_number
Verso ) as the terminating character, the dialling will be confirmed automatically
when the code entering timeout expires as if
pressed.

Maximum number of dialled digits

number in the Telephone mode. When this limit is reached, the number is dialled
automatically without pressing *.

Keypad Mapping

®
The 2N IP Audio Kit
for up to 16 external buttons or a keypad. The functions can be set for each button
separately.
The buttons and their settings are arranged in a matrix of 4 columns x 4 rows; see the
figure below.
The figure below shows the default button settings.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
IP Vario models only.
– enable call setup to phone numbers dialled via the
®
for 2N IP Verso
– set the maximum count of digits for a phone
®
and 2N IP Video Kit
). If you do not press
(or for
models are equipped with eight terminals
phone_number (or
®
(or for 2N IP
®
2N IP Verso ) was
86/198