Virtual Number; User Switch Codes; User Cards - 2N IP intercom Configuration Manual

Virtual number

number can have 2 to 4 digits. Virtual numbers are not associated with user
telephone numbers. They are included in an independent numbering plan
allowing you to withhold user telephone numbers, especially in installations
where the quick dial button count is insufficient. The visitor enters a virtual
number via the numerical keypad and presses the * key. You are recommended
to place a clear user/virtual number list nearby including simple instructions for
use to facilitate this type of user calls. Enable this function in the Dial by Numeric
Keypad in the
User phone numbers
in predefined time intervals or at the same time (group calls). You can assign a
time profile and the address of the PC on which the
running to display the intercom camera image before call answering, for
example.
Disabled
User virtual number
and press * to start the call.
User position number
keypad and press * to start the call. This original FW 2.10 option is no more
recommended due to potential user management troubles.

User switch codes

e.g.). A time profile can be assigned to each code.

User cards

– enter the user-defined access cards with/without a time profile.
Enable/disable double authentication (valid user card + switch activating code)
for each user.
User mobile key – allows to authenticate users using a mobile app 2N
Key .
2N TELEKOMUNIKACE a.s., www.2n.cz
– number to be used for user calling via a numeric keypad. The
Hardware / Keypad
– enter up to three user numbers to be called sequentially
– no user number can be entered via the numeric keypad.
– enter the user virtual number via the numeric keypad
– enter the user position (01–1999) via the numeric
– enter the switch activating user codes (door lock activation,
menu. The following options are available:
2N
®
IP Eye application is
®
Mobile
42/198