Username
– set the FTP server username. The parameter is mandatory if the FTP
server requires user authentication.
Password
– set a password for the above mentioned FTP server user.
Passive mode
– select the passive transmission mode (as web browser).
Remote dir ectory – set the FTP server directory to which the camera images
shall be saved.
Picture resolution
– set the image resolution.
Upload pictures
– set automatic picture sending to the FTP server at the call
start or after a preset time period. You can disable automatic sending
(Automation) and send pictures via
Action.UploadSnapshotToFtp
.
Upload period
– set the picture sending period in steps (10 seconds to 30
minutes) when
Upload pictures
is set to
Periodic
.
2N TELEKOMUNIKACE a.s., www.2n.cz
137/198