Bluetooth Module; Multiple Authentication; Associated Switch; Read Signalling - 2N IP intercom Configuration Manual

Multiple authentication

(or the user authentication option defined in
authentication for a card reader to cancel code authentication via the numeric
keypad.

Associated switch

valid RFID card. The set value is not applied when a valid user card is tapped on
the reader while the double authentication mode is enabled. In this case, a
numeric switch activating code is required to identify the switch to be
activated.)

Read signalling

Full – acoustic signals distinguish valid/invalid cards
Single beep
None – acoustic signalling is disabled
Allowed card types
selection is made, all types of supported cards are accepted.
Forward to Wiegand output
received RFID card IDs will be resent.

Bluetooth Module

Module name – set the module name for logging events from the Bluetooth
module.
Direction – set the reader direction (Not specified, Arrival, Departure) for the
Attendance system purposes.
2N TELEKOMUNIKACE a.s., www.2n.cz
– enable multiple user authentication via the card reader
– set the number of the switch to be activated by tapping of a
– set one of the card reading signalling modes:
– one beep signals both valid and invalid cards
– select one or more card types to be accepted. If no
– set a group of Wiegand outputs to which all the
Directory / Users ). Disable multiple
110/198