Upgrade Firmware; Check Firmware Online; Restart Device - 2N IP intercom Configuration Manual

Caution
The default state reset deletes the licence key if any. Hence, we
recommend you to copy it to another storage for later use.
Upgrade firmware – upgrade your intercom firmware. Press the button to
display a dialogue window for you to select and upload the firmware file to the
intercom. The intercom will automatically get restarted and new FW will then be
available. The whole upgrading process takes less than one minute. Refer to
www.2n.cz . for the latest FW version for your intercom. FW upgrade does not
affect configuration as the intercom checks the FW file to prevent upload of a
wrong or corrupted file.
Check firmware online – check online whether a new firmware version is
available. If so, download the new FW version and an automatic device upgrade
will follow.
Restart device – restart the intercom. The process takes about 30 s. When the
intercom has obtained the IP address upon restart, the login window will get
displayed automatically.
Caution
The intercom configuration change writing takes 3–15 s depending on
the intercom configuration size. Do not restart the intercom during this
process.
Licence – click Display to display a dialogue window including a list of used
licences and third party software as well as a EULA link.
Send anonymous statistics data – enable sending of anonymous statistic data on
device usage to the manufacturer. These data do not include any sensitive
information such as passwords, access codes or phone numbers. This
information helps 2N TELEKOMUNIKACE a.s. improve the software quality,
reliability and performance. Your participation is voluntary and you can cancel
this sending any time.
2N TELEKOMUNIKACE a.s., www.2n.cz 189/198