Current Ir Led Brightness Level; Video Input; Video Standard; Motion Detection Enabled - 2N IP intercom Configuration Manual

Current IR LED brightness level – display the current IR LED brightness level
percentage. The level can automatically be decreased below the set value so
that the maximum power consumption cannot be exceeded (typically, when
multiple extenders are connected and PoE supply is used).
Note
This setting is only available in the models equipped with an external
analogue camera input.
Video input – choose one of the analogue camera inputs. You can change the
input by automation via the Action.SetCameraInput during operation.
Video standard – set the video standard for the camera connected. Modify the
value only if the automatic video standard detection does not work well ( Auto
value).
Motion detection enabled – enable automatic motion detection via an internal
camera. Motion is detected by monitoring of a brightness change in the selected
image section in time. When objects move within the camera range, the selected
part of the image detects an activity, which can be expressed in percentage. If
the activity exceeds the upper limit, motion is detected and indicated as long as
the activity drops below the lower limit. Select the sensitivity thresholds and
detection area according to the requirements and installation site conditions.
2N TELEKOMUNIKACE a.s., www.2n.cz 80/198