Extending Module Connection - 2N IP Solo Installation Manual

2.4 Extending Module Connection

®
2N IP Solo allows to connect the following extending modules:
• Security relay
Security Relay
®
The 2N IP Security Relay (Part No. 9159010) is used for enhancing security between the
intercom and the connected electric lock. The 2N
any 2N IP intercom model with firmware versions 1.15 and higher. It significantly enhances
security of the connected electric lock as it prevents lock opening by forced intercom tampering.
Function:
®
The 2N IP Intercom Security Relay is a device installed between an intercom (outside the
secured area) and the electric lock (inside the secured area). The 2N
Relay includes a relay that can only be activated if the valid opening code is received from the
intercom.
Specifications:
Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Switched output:
• Where the security relay is fed from the intercom, 9 to 13 V DC is available on the output
depending on the power supply (PoE: 9 V; adapter: source voltage of minus 1 V) / 400 mA
DC.
• Where the security relay is fed from an external power supply, 12 V / 700 mA DC is available
on the output.
Dimensions: (56 x 31 x 24) mm
Weight: 20 g
Installation manual 2N® IP Solo
®
IP Intercom Security Relay is designed for
®
IP Intercom Security
51 / 74