Traffic Log - Furuno FELCOM 70 Operator's Manual

6. DATA COMMUNICATION
6.1.6

Traffic log

In the vtLite idle window, clicking Log lets you select between traffic logs for
packet switched data (MPDS) and all other circuit switched call types.
Clicking the right arrow key expands the level of detail on entries listed.
In the Traffic Log window:
MPDS: note that this information is included for information only and should not
be used e.g. for billing purposes. It contains some of the information also
indicated in the "Real Time" status indications, and can be usefull to pinpoint any
potential problem during a call. A low C/No < 535, will most likely give many
retransmissions on the sattelite link. You should see this in the number of Srej
TX and RX being higher than normal.
6-16
C/No
Press [→] key.