Felcom 70 Starts Up - Furuno FELCOM 70 Operator's Manual

2. OPERATION FROM HANDSET
2.5

FELCOM 70 starts up

FELCOM 70 automatically initializes the system and searches for the satellite.
See "3.2 Satellite search" in this manual to restart a search manually.
If required, see "3.4 Selecting default Net service provider".
Idle
When idle, the ISDN Handset displays as follows.
The alarm indicator flashes when an alarm condition occurs. The indicator stops
once the alarm has been read in the Display Handset by pressing
Information > Alarms & messages".
The indicator continues to be displayed if the alarm condition persists.
Note: If the searching begins suddenly due to satellite blocking, restart a search
manually, specifying your ocean region. See page 3-3 for details.
2.6 Making a call
1. Dial 00, country code and subscriber number, e.g.:
0 0
• When entered, the display
reads:
• When the remote end answers,
the display reads:
The timer starts.
2. End the call by pressing
hook ON/OFF
replacing the handset in the cradle.
2-4
Furuno Fleet
Enumerating
Euro-ISDN
Ocean Region
Service provider
Signal strength
indicator
8 1 2 4 4
6 7
abc abc abc
pqrs mno pqrs abc
Japan
For normal call
For handsfree call
Timer, minutes:seconds
, or
KDD IOR
Initializing
KDD
Searching
KDD IOR
Ready for call
Alarm indicator
0 0
7
pqrs
Dial (4.8K)
008167244700
Calling ...
008167244700
Connected 09:46
008167244700-
Disconnected
IOR
KDD IOR
Ready for call
>
MENU