Traffic Log Settings - Furuno FELCOM 70 Operator's Manual

4.5

Traffic log settings

(owner level only, see "Shifting to owner level" on page 5-4.)
1 In the Main window, clicking Log opens the Traffic log window, which
displays the current log mode, number of unprinted calls, and whether
logging of incoming calls is enabled/disabled.
Point to Logging mode, click Edit or
• Paused: any logging is off.
• Cleared: all log entries are deleted (incoming and outgoing).
• Enabled: outgoing logging is on.
Scroll
• Scroll down
disable logging of incoming calls.
Circuit switched calls:
2 Clicking Cct in the Traffic log (window 1 shown in the figure below) opens the
list of all call records except MPDS calls.
Print outputs all unprinted calls (marked with a star):
• Clicking Tag* marks all calls with a hash, which adds the records to the
printout file.
• Clicking Tag marks the selected call with a hash, which adds the record to
the printout file.
• Clicking Tag again untags a selected record.
3 Pressing
/ to wanted mode, and click to select.
to Log incoming calls and click Edit or
at a record when in window (2) displays detailed call data.
1
2
* #
Call not yet printed Tagged for printout
3
4. OPERATION FROM PC
to choose mode of operation:
Hours:minutes:seconds
to enable or
4-9