Connecting Up - Furuno FELCOM 70 Operator's Manual

6.2.2

Connecting up

USB driver installation
Prior to installing the USB drivers, remove vtLite Mobile if it is to be used via
USB.
Remove all programs that use virtual COM ports, such as RVS.
The programs may be reinstalled when the USB installation has been
completed.
Procedure:
1 Insert the CD enclosed with the manual.
2 With the terminal ON, connect the USB cable in both FELCOM 70 and the
PC.
3 Windows opens the Found New Hardware Wizard.
See next page.
FELCOM 70
Note: The USB port can not be used. If you want to use an USB port on your PC,
use a commercially available RS-232-USB converter and install its driver.
Modem Drivers
Win 2000/XP:
Mdm4nera.inf
ISDN ISDN
SILENCE
RS-422 ISDN ISDN
ISDN ISDN TEL 4
ISDN ISDN TEL 3 USB RS-232
B
PC USB port
RS232-USB
converter
6. DATA COMMUNICATION
RS-232
A
DTE
6-23