Furuno FELCOM 70 Operator's Manual page 196

7. TROUBLESHOOTING
12B1/37
12B1/38
12B1/41
12B1/42
12B1/43
12B1/44
12B1/45
12B1/46
12B1/47
12B1/48
12B1/49
12B1/50
12B1/51
12B1/52
12B1/54
12B1/55
12B1/56
12B1/57
12B1/59
12B1/60
12B1/61
12B1/62
12B1/63
12B1/64
12B1/65
12B1/67
call).
12B1/68
12B1/69
12B1/70
7-10
Used in CONTROL_PP to indicate a preemption of a ship- or
shore-call, for a MES initiated distress-call.
Used in DTLXMNG_DPP to indicate a timeout of timer TS308, no
mark has been received from the LES.
Printer not ready. Power may be turned off, cable not connected,
paper empty or printer not selected/on-line
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. no_text
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. no_acknowledge
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. no_synch
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. no_Rx_lock
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. no_Tx1_lock
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. no_Tx2_lock
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. missing_or_illegal_channel
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. no_authorization
CHANNEL_ERROR detected by CHNL_SERVICE_CP or
CHNL_ICP. burst_not_sent
Precharge terminal has run out of time. Must refill before call is
possible. out_of_charged
Wrong PIN code entered. incorrect_pin_code
Used when access is restricted due to Enhanced Function
inconsistency. ses_use_restricted
A command to the ACU was not accepted (4 times), link restarted.
acu_cmd_failed
A command to the PCU was not accepted (4 times), link restarted.
pcu_cmd_failed
Antenna initialize failed. ant_init_failed
Operation/Function failed
Operation not possible, function is busy
No lcm_connect received from shore after lcm_estblish sent (asd)
Data link failure in asd communication
Radio Silence activated
Inactivity timeout for data calls
Limited duration timeout for 16QAM calls. Call duration guard
activated (Menu 42)
Various error situations releated to SIM authentication (during
Power down requested. power_down_MCU
Traffic log buffer is full
Duplex interface busy.