Details Log - Furuno FMD-3200 Operator's Manual

19.2

Details Log

The [Details] log contains various voyage information, recorded once per minute.
• Date of entry
• Time of entry
• Source: No. of unit which generated log
• Type: Type of position data
• Auto: Automatic input of position
• Latitude, Longitude: Position as output by selected sensor and sensor used as the
data source.
• Align/NM, Align/°T: Range, bearing offset, if used
• SOG/kn, COG/°T, S. SRC: Speed over the ground and its source
• HDG/°T, S. SRC: Heading data and its source
• CORR/°T: Gyro correction value, if used.
How to view the Details log
On the InstantAccess bar™, click the [Log], [NAV Log] and [Detail] buttons on the In-
stantAccess bar™.
• To show the logs of a specific period, enter the period to show with [Period Cov-
ered (UTC)] then click the [Set Period] button. Use the [Clear Period] button to display
all logs. Log entries outside the set period become gray and the entries inside the set
period remain visible. To show log entries which are not visible, spin the scrollwheel
upward to scroll up the log, downward to scroll down the log.
• To refresh the log, click the [Refresh] button.
• To search the log, do as follows:
1) Click the [Find] button to show the [Find
text] box.
2) Click the input box then enter the text to
search.
3) Select the search direction with the up or
down radio button.
4) Click the [Find] button. The first matching
text is highlighted in yellow at the top of
the screen.
5) To continue the search click the [Find]
button. To cancel the search, click the
[Cancel] button.
• To print the log, click the [Print Text] button. Select print-
ing format then click the [Print] button. [Spread Portrait]
prints two pages of data on one page.
• To show track for the period selected, click the [Show
Track] button. Use the [Hide Track] button to erase the
track.
• To export the log, click the [Export File] button. The file
is named
DetailsLogYYYYMMDDhhmmss.csv.
19. RECORDING, PLAYBACK FUNCTIONS
Input box
Input text in box and
[Find] button appears.
Find
19-5