Furuno FELCOM 70 Operator's Manual page 191

Alarms and Messages function
The following information may be read out:
• Active alarms and warnings that are not yet read
• Information log, list of previous alarm conditions, warnings and event
information
• Clear cause log, list of abnormal conditions that have caused a call to be
cleared
• Statistics list, statistics on terminal performance
• Error log
• Restart log
The Alarms and messages icon only appears when Set diagnostics is set to
On.
1 Double-click the Advanced functions icon to open the Configuration
menu.
2 Double-click the Configuration > Set diagnostics icons. Click On > Ok to
turn on diagnostics.
3 Double-click the Advanced functions icon again.
The Alarms and messages icon now appears in the Advanced functions
menu.
4 Double-click the icon to open the Alarms and messages menu. See next
page.
For printout, see "5.15 Print handling setup."
1
2
Exit Menu
4. Alarms
3. Software
Exit Menu 1. Access
and messages
control update prep.
Exit Menu 1. ISDN 2. Net service
configuration providers
9. Spot Beam
8. Charge
Report Method
tone
3
7. TROUBLESHOOTING
7.
Configuration
4. Set 7. Rx L-Band
diagnostics Setup
7-5