Alarms And Messages - Furuno FELCOM 70 Operator's Manual

7. TROUBLESHOOTING

7.2 Alarms and messages

7.2.1 Introduction
Furuno ISDN Handset in idle
When idle, the ISDN Handset displays as
follows.
The alarm indicator flashes when an alarm
condition occurs.
The indicator stops once the alarm has been
read in the Display Handset by pressing
> Information > Alarms & messages".
The alarm indicator continues to be displayed if
the alarm condition persists.
7-4
Ocean Region
KDD
Service provide
Status
Ready for call
Signal strength
Indicator
Alarm indicator
›› Sat. Search
MENU
phone setup
Set Network
Priority Call
Ports
Information
›› Diahnostics
Traffic log
Forward Id
Version Info
Network Info
Alarms & Msgs
Position
Speed/ Couse
›› Clear Caises
Alarms List
In to Log
IOR