Ethernet Interface - Furuno FELCOM 70 Operator's Manual

5. CONFIGURATION FROM PC
5.16

Ethernet interface

Port configuration gets an additional tag for Telnet settings. Click Configure >
Port and Telnet settings tag.
If Enable access via LAN is ticked then vtLite will attempt to communicate
using a raw telnet connection to the server address given in the server box. It will
use the default telnet port 23.
If Empty ERB access mode is also ticked then over the telnet session the vtLite
will attempt to login to an Ethernet Router Board (currently no in use).
If the Ethernet connection is used then the vtLite port indicator will show "LAN"
rather than the port number.
5-39