Restore Default Settings - Newland NLS-HR1550-30 User Manual

**【Enter Setup】
EAN-8

Restore Default Settings

Scan the barcode below to restore all parameters in EAN-8 configuration to the factory default settings. To find the related
default settings, see the "Default Parameters Table" section in Appendix.
【Restore the Default Settings of EAN-8】
Enable/Disable EAN-8
EAN-8 is enabled by default.
**【Enable EAN-8】
【Disable EAN-8】
Note: If the scanner fails to identify EAN-8 barcodes, you may first try this solution by scanning the Enter Setup barcode
and then Enable EAN-8 barcode.
【Exit Setup】
72