Set Length Range For Interleaved 2 Of 5 - Newland NLS-HR1550-30 User Manual

**【Enter Setup】

Set Length Range for Interleaved 2 of 5

The scanner can be configured to only decode Interleaved 2 of 5 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes Interleaved 2 of 5 barcodes with
either the minimum or maximum length. If minimum length is same as maximum length, only Interleaved 2 of 5 barcodes
with that length are to be decoded.
【Set the Minimum Length】
Example: Set the scanner to decode Interleaved 2 of 5 barcodes containing between 8 and 12 characters
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8". (See the "Digit Barcodes" section in Appendix)
3.
Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
4.
5. Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2".
6.
7. Scan the Save barcode.
8. Scan the Exit Setup barcode.
【Exit Setup】
【Set the Maximum Length】
102