**【Enter Setup】
Operating Mode Options
【Power Off
【Deep Sleep Mode
【Light Sleep Mode
Note:
1. The scanner that has been turned off in this way cannot be awakened. To turn it back on, disconnect it from the host
device and reconnect it.
2. To awaken the scanner, press the trigger.
3. To awaken the scanner, press the trigger or communicate with the scanner.
4. Pressing the trigger can exit the Test mode.
The Test mode, Deep Sleep mode and Light Sleep mode are available for temporary use only. They will become
invalid after the scanner is restarted/rebooted.
【Exit Setup】
】
1
】
2
】
3
【Test Mode
】
4
【Reboot Scanner】
22