Default Settings; Factory Defaults; Custom Defaults - Newland NLS-FM515 Series User Manual

Default Settings

Factory Defaults

Scanning the following barcode can restore the scanner to the factory defaults.
You may need to reset all parameters to the factory defaults when:

scanner is not properly configured so that it fails to decode barcodes.

you forget previous configuration and want to avoid its impact.

Custom Defaults

Scanning the Restore All Custom Defaults barcode can reset all parameters to the custom defaults. Scanning the Save
as Custom Defaults barcode can set the current settings as custom defaults.
Custom defaults are stored in the non-volatile memory.
Save as Custom Defaults
Restoring the scanner to the factory defaults will not remove the custom defaults from the scanner.
25
Restore All Factory Defaults
Enter Setup
Restore All Custom Defaults
** Exit Setup