**【Enter Setup】
Decode Area and Output Interval
You can set the number of barcodes allowed to be read per scan. By default, the Read One Barcode Nearest to the
Center Per Scan option is enabled.
You can also set the decoded data output interval. By default, output interval is 0ms.
【Read 2 Barcodes Per Scan】
【Read 3 Barcodes Per Scan】
【Read 4 Barcodes Per Scan】
**【Set Output Interval to 0ms】
【Set Output Interval to 50ms】
【Exit Setup】
**【Read One Barcode Nearest to the Center Per Scan】
【Read One Barcode At The Center Per Scan】
【Set Output Interval to 100ms】
【Set Output Interval to 150ms】
38