Appendix - Newland NLS-HR1550-30 User Manual

Factory Defaults Table
Parameter
General Settings
Setup Mode
Programming Barcode Data
Scan Mode
Decode Session Timeout
Timeout between Decodes
Sensitivity
Security
Good Read Beep
Number of Barcodes per Scan
Output Interval
Reread Same Barcode
Timeout between Decodes (Same Barcode)
(For the Continuous and Sense modes only)
Recalculate Timeout After Good Read
Manual-Sense Mode Switch
Wait Time
Communication Settings
Baud Rate
Enabled
Do not send
Manual Mode
15 seconds
1 second
High Sensibility
Level 1
Medium-Pitched Loud Beep, 150ms
Read One Barcode Nearest to the
Center Per Scan
0ms
Auto Mode Disabled
Continuous Mode Enabled
Sense Mode Enabled
1.6 seconds
Enabled
Disabled
3s
9600bps

Appendix

Factory Default Remark
00~15 (00: Infinite; 01~15:
1~15sec)
00~15 (0~7.5sec)
Applicable to the Sense mode
Beep notification after good read
0~120 (0~12.0s); 127: Infinite
Applicable to the Auto mode
00~07 (0~7s)
RS-232
184