**【Enter Setup】
Industrial 25
Restore Default Settings
Scan the barcode below to restore all parameters in Industrial 25 configuration to the factory default settings. To find the
related default settings, see the "Default Parameters Table" section in Appendix.
【Restore the Default Settings of Industrial 25】
Enable/Disable Industrial 25
Industrial 25 is enabled by default.
**【Enable Industrial 25】
【Disable Industrial 25】
Note: If the scanner fails to identify Industrial 25 barcodes, you may first try this solution by scanning the Enter Setup
barcode and then Enable Industrial 25 barcode.
【Exit Setup】
120