**【Enter Setup】
Plessey
Restore Default Settings
Scan the barcode below to restore all parameters in Plessey configuration to the factory default settings. To find the related
default settings, see the "Default Parameters Table" section in Appendix.
【Restore the Default Settings of Plessey】
Enable/Disable Plessey
Plessey is disabled by default.
【Enable Plessey】
**【Disable Plessey】
Note: If the scanner fails to identify Plessey barcodes, you may first try this solution by scanning the Enter Setup barcode
and then Enable Plessey barcode.
【Exit Setup】
148