Check Digit Verification - Newland NLS-HR1550-30 User Manual

**【Enter Setup】

Check Digit Verification

Check digits are optional for MSI-Plessey and can be added as the last one or two digits, which are calculated values used
to verify the integrity of the data. By default, the scanner does not transmit check digit after verification (One Check Digit,
MOD10).
If the Disable option is enabled, the scanner transmits MSI-Plessey barcodes as is.
【Disable】
**【One Check Digit, MOD10】
【Two Check Digits, MOD10/MOD10】
【Two Check Digits, MOD10/MOD11】
**【Do Not Transmit Check Digit】
【Transmit Check Digit】
Note: If you select a check digit algorithm and the Do Not Transmit Check Digit option, MSI-Plessey barcodes with a
length that is less than the configured minimum length after having the check digit(s) excluded will not be decoded. (For
example, when the One Check Digit, MOD10 and Do Not Transmit Check Digit options are enabled and the minimum
length is set to 4, MSI-Plessey barcodes with a total length of 4 characters including the check digit cannot be read.)
【Exit Setup】
154