Newland NLS-HR1550-30 User Manual page 137

Set Code ID
Code ID can only consist of one or two English letters. See the "Code ID Table" section in Appendix to find the default
Code ID for Standard 25.
To set the Code ID, scan the Set Code ID for Standard 25 barcode, the numeric barcodes corresponding to the
hexadecimal value of a desired ID and the Save barcode.
Example: Set the Code ID of Standard 25 to "p" (its hexadecimal value is 0x70)
1. Scan the Enter Setup barcode.
2. Scan the Set Code ID for Standard 25 barcode.
Scan the numeric barcodes "7" and "0". (See the "Digit Barcodes" section in Appendix)
3.
Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
4.
5. Scan the Exit Setup barcode.
125
【Set Code ID for Standard 25】
**【Enter Setup】
【Exit Setup】