Enter Setup
Restore All Default Code IDs
For the information of default Code IDs, see the Appendix 3: Code ID Table.
Modify Code ID
Code ID of each symbology can be programmed separately. See the following example to learn how to
program a Code ID.
Example: Set the Code ID of PDF417 to "p"
Check the hex value of "p" in the Appendix 4: ASCII Table. ("p": 70)
1.
2.
Scan the Enter Setup barcode.
3.
Scan the Modify PDF417 Code ID barcode.
Scan the numeric barcodes "7" and "0". (See the Appendix 10: Digit Barcodes)
4.
5.
Scan the Save barcode. (See the Appendix 11: Save/Cancel Barcodes)
6.
Scan the Exit Setup barcode.
Exit Setup
**
Restore All Default Code IDs
36