**【Enter Setup】
Deutsche 14
Restore Default Settings
Scan the barcode below to restore all parameters in Deutsche14 configuration to the factory default settings. To find the
related default settings, see the "Default Parameters Table" section in Appendix.
【Restore the Default Settings of Deutsche 14】
Enable/Disable Deutsche 14
Deutsche 14 is disabled by default.
【Enable Deutsche 14 But Do Not Transmit Check Digit】
**【Disable Deutsche 14】
【Enable Deutsche 14 and Transmit Check Digit】
Note: It is advised not to enable Deutsche 14 unless necessary, because Deutsche 14, ITF-14 and Interleaved 2 of 5 use
the same encoding method and enabling them at the same time can easily cause confusion with each other when
decoding.
【Exit Setup】
108