Set Code ID
Code ID can only consist of one or two English letters. See the "Code ID Table" section in Appendix to find the default
Code ID for ITF-6.
To set the Code ID, scan the Set Code ID for ITF-6 barcode, the numeric barcodes corresponding to the hexadecimal
value of a desired ID and the Save barcode.
Example: Set the Code ID of ITF-6 to "p" (its hexadecimal value is 0x70)
1.
Scan the Enter Setup barcode.
2.
Scan the Set Code ID for ITF-6 barcode.
Scan the numeric barcodes "7" and "0". (See the "Digit Barcodes" section in Appendix)
3.
Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
4.
5.
Scan the Exit Setup barcode.
105
【Set Code ID for ITF-6】
**【Enter Setup】
【Exit Setup】