Set Length Range for Standard 25
The scanner can be configured to only decode Standard 25 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes Standard 25 barcodes with either
the minimum or maximum length. If minimum length is same as maximum length, only Standard 25 barcodes with that
length are to be decoded.
【Set the Minimum Length】
Example: Set the scanner to decode Standard 25 barcodes containing between 8 and 12 characters
1.
Scan the Enter Setup barcode.
2.
Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8". (See the "Digit Barcodes" section in Appendix)
3.
Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
4.
5.
Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2".
6.
7.
Scan the Save barcode.
8.
Scan the Exit Setup barcode.
127
【Set the Maximum Length】
**【Enter Setup】
【Exit Setup】