**【Enter Setup】
Introduction
Every symbology (barcode type) has its own unique attributes. This chapter provides programming barcodes for
configuring the scanner so that it can identify various barcode symbologies. It is recommended to disable those that are
rarely used to increase the efficiency of the scanner.
Code 128
Restore Default Settings
Scan the barcode below to restore all parameters in Code 128 configuration to the factory default settings. To find the
related default settings, see the "Default Parameters Table" section in Chapter 7.
Enable/Disable Code 128
Code 128 is enabled by default.
**【Enable Code 128】
Note: If the scanner fails to identify Code 128 barcodes, you may first try this solution by scanning the Enter Setup
barcode and then Enable Code 128 barcode.
【Exit Setup】
Chapter 6 Symbologies
【Restore the Default Settings of Code 128】
【Disable Code 128】
60