Enter Setup
Operating Modes
The scanner provides the following two operating modes:
Batch Mode
Batch Mode Options
Off: The scanner attempts to transmit every barcode you scan. When you are out of service range, the scanned data will
be lost.
Automatic Batch Mode: When in service range, the scanner attempts to transmit every barcode you scan. When out of
range, the scanner stores the scanned data in the flash memory. Once you are back to service range, the scanner will
automatically transmit the stored data and then remove it from the flash memory after transmission is done.
Manual Batch Mode: Scanned data will be stored in the flash memory no matter whether you are in service range or not.
You may send the stored data to the host in either of the following ways: (i) press the Batch button on the cradle after
inserting the scanner in cradle; or (ii) scan the Transmit Stored Data barcode. The scanner will automatically remove the
stored data from the flash memory after transmission is done if the Auto Clear Stored Data after Transmission feature is
turned on.
** Exit Setup
Chapter 4 Wireless Communications
Bluetooth HID Keyboard
** Cradle Mode
40