Operating Mode Options - Newland HR11+ Aringa User Manual

Operating Mode Options

Power Off
Light Sleep Mode
Note:
1 The scanner that has been turned off in this way cannot be awakened. To turn it back on, disconnect it
from the host device and reconnect it.
2 To awaken the scanner, press the trigger.
3 To awaken the scanner, press the trigger or communicate with the scanner.
The Deep Sleep mode and Light Sleep mode are available for temporary use only. They will
become invalid after the scanner is turned off or rebooted.
19
1
3
** Enter Setup
Deep Sleep Mode 2
Reboot Scanner
Exit Setup