请更换节标题
Reading
Hand-held Mode
1、
Ensure HR200, cables, and the Host are connected, then turn the unit Power ON
2、
Press & hold Trigger. Illumination LED and Aiming LED cast an Illumination Pattern
(red light) and an Aiming Pattern (blue light);
3、
Keep Illumination Pattern in the center of a bar code. Zoom in and zoom out to allocate
the Optimum Reading Stance.
4、
On a successful reading, there'll be a beep sound,
die out. The HR200 then transmits barcode message to the Host.
NOTE: Experiences tell a certain range of distances has higher successful reading rate. This
range is the Optimum Reading Stance.
illumination & aiming patterns
E-09