Chapter 4 Wireless Communications; Operating Modes; Batch Mode; Batch Mode Options - Newland NLS-HR15-BT User Manual

Operating Modes

The scanner provides the following two operating modes:
Bluetooth HID Mode allows your scanner to communicate with a remote host using Bluetooth. You must first pair your
scanner to the host before these two Bluetooth devices can communicate with each other. All features available for USB
HID Keyboard are applicable to Bluetooth HID.
Cradle Mode allows your scanner to communicate with a remote host by pairing with a cradle.
** Cradle Mode

Batch Mode

Batch Mode Options

Off: The scanner attempts to transmit every barcode you scan. When you are out of service range, the scanned data will
be lost.
Automatic Batch Mode: When in service range, the scanner attempts to transmit every barcode you scan. When out of
range, the scanner stores the scanned data in the flash memory. Once you are back to service range, the scanner will
automatically transmit the stored data and then remove it from the flash memory after transmission is done.
Manual Batch Mode: Scanned data will be stored in the flash memory no matter whether you are in service range or not.
You may send the stored data to the host in one of the following ways: (i) press the Batch button on the cradle after
inserting the scanner in cradle; (ii) scan the Transmit Stored Data barcode; or (iii) send the corresponding serial command
to the scanner. The scanner will automatically remove the stored data from the flash memory after transmission is done if
the Auto Clear Stored Data after Transmission feature is turned on.
49

Chapter 4 Wireless Communications

Enter Setup
Bluetooth HID Mode
** Exit Setup