Deutsche 14; Restore The Default Value; Allow To Read Deutsche14 Or Not; Codeid Setup - Newland NLS-HR15XX-30 User Manual

Nls-hr15 series corded 1d barcode scanner

Table of Contents

【Start Setup】

5. Read the "Exit Setup" barcode.

Deutsche 14

By reading the barcode, the parameter setup of Deutsche14 will be restored to the factory default state.

Allow to Read Deutsche14,but do not send the check digit

Allow to Read Deutsche14 and send the check digit

Note: the scanner will become unable to read Deutsche14 by reading the setup barcode "Prohibit Reading Deutsche14",

thus, if the scanner is unable to read the Deutsche14, please try to read the setuo barcode "allow to read Deutsche14".

Deutsche 14 uses the same coding method as ITF-14 and normal ITF, so if all these are used at the same time, the

misunderstanding of function setup and decoding will easily occure, thus, it is suggested to turn off the Deutsche 14 if it is

not in use.

To activate the setup function by reading "CodeID setup", then read the hexadcimal value inaccordance with the character

which will be set to the CodeID.

Example: Set the CodeID ofDeutsche14 to "p" (the hexadcimal value is 0x70).

1. Read the "Start Setup" barcode.

2. Read the "CodeID Setup" barcode.

【Exit Setup】

Restore the Default Setup Value of Deutsche14

CodeID Setup

Prohibit Reading Deutsche14

Table of Contents